Oxidation removal System – Neutralising Cleaner
USP TRAINING
Our training courses and schemes will ensure you are competent and qualified to use your new products correctly and efficiently.
Tel: 0844 811 1370
Oxidation removal System – Neutralising Cleaner
Size | 5 Litre, 25 Litre |
---|
concrete, natural and artificial stone, terracotta, tiling, stoneware, marble
SAFETY DATA SHEET
USP-706b
Section 1: Identification of the substance/mixture and of the company/undertaking
Page: 1 Compilation date: 06/05/2018 Revision date: 06/5/2018 Revision No: 4
1.1. Product identifier
Product name: Use of substance / mixture:
Company name:
Tel:
Email:
1.4. Emergency telephone number
Emergency tel:
USP-706b Neutralising Cleaner
Urban Surface Protection Ltd Daisy Dene,
Inglewhite Road
Preston
PR3 2EB United Kingdom
00 44 1772780873 info@urbansurfaceprotection.co.uk
07701308748 (office hours only)
1.2. Relevant identified uses of the substance or mixture and uses advised against |
1.3. Details of the supplier of the safety data sheet |
Section 2: Hazards identification
2.1. Classification of the substance or mixture
Classification under CLP: Most important adverse effects:
2.2. Label elements
Label elements: Hazard statements: Hazard pictograms:
Signal words: Precautionary statements:
Skin Corr. 1A: H314; Eye Dam. 1: H318 Causes serious eye damage.
H318: Causes serious eye damage. GHS05: Corrosion
Danger
P102: Keep out of reach of children.
P260: Do not breathe fumes.
P262: Do not get in eyes, on skin, or on clothing.
SAFETY DATA SHEET
USP-706b
Page: 2
P304+340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists: Get medical advice/attention.
P314: Get medical advice/attention if you feel unwell.
P280: Wear protective gloves/protective clothing/eye protection/face protection. P301+330+331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+361+353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
2.3. Other hazards
Other hazards: Irritating to eyes. Irritating to skin.
PBT: This product is not identified as a PBT/vPvB substance.
Section 3: Composition/information on ingredients 3.2. Mixtures
Hazardous ingredients:
ISOTRIDECANOL ETHOXYLATE (EO 6 – 20)
SODIUM HYDROXIDE
QUATERNARY C12-14 ALKYL METHYLE AMINE ETHOXYLATE METHYL CHLORIDE
Section 4: First aid measures
4.1. Description of first aid measures
Skin contact: Remove all contaminated clothes and footwear immediately unless stuck to skin. Drench the affected skin with running water for 10 minutes or longer if substance is still on skin. Transfer to hospital if there are burns or symptoms of poisoning.
Eye contact: Bathe the eye with running water for 15 minutes. Transfer to hospital for specialist examination.
Ingestion: Wash out mouth with water. Do not induce vomiting. Give 1 cup of water to drink every 10 minutes. If unconscious, check for breathing and apply artificial respiration if necessary. If unconscious and breathing is OK, place in the recovery position. Transfer to hospital as soon as possible.
EINECS |
CAS |
PBT / WEL |
CLP Classification |
Percent |
– |
24938-91-8 |
– |
Acute Tox. 4: H302+332; Eye Dam. 1: H318 |
2.000% |
215-185-5 |
1310-73-2 |
– |
Skin Corr. 1A: H314 |
1.600% |
– |
863679-20-3 |
– |
Acute Tox. 4: H302; Skin Irrit. 2: H315; Eye Dam. 1: H318 |
1.000% |
Inhalation: Remove casualty from exposure ensuring one’s own safety whilst doing so. If
SAFETY DATA SHEET
USP-706b
Page: 3 unconscious and breathing is OK, place in the recovery position. If conscious, ensure
the casualty sits or lies down. If breathing becomes bubbly, have the casualty sit and
provide oxygen if available. Transfer to hospital as soon as possible.
4.2. Most important symptoms and effects, both acute and delayed
Skin contact: Blistering may occur. Progressive ulceration will occur if treatment is not immediate. Eye contact: Corneal burns may occur. May cause permanent damage.
Ingestion: Corrosive burns may appear around the lips. Blood may be vomited. There may be bleeding from the mouth or nose.
Inhalation: There may be shortness of breath with a burning sensation in the throat. Exposure may cause coughing or wheezing.
Delayed / immediate effects: Immediate effects can be expected after short-term exposure. 4.3. Indication of any immediate medical attention and special treatment needed
Section 5: Fire-fighting measures 5.1. Extinguishing media
Immediate / special treatment: Eye bathing equipment should be available on the premises.
Extinguishing media: Suitable extinguishing media for the surrounding fire should be used. Use water spray
to cool containers.
5.2. Special hazards arising from the substance or mixture
Exposure hazards: Corrosive. In combustion emits toxic fumes. 5.3. Advice for fire-fighters
Advice for fire-fighters: Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.
Section 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Personal precautions: Notify the police and fire brigade immediately. If outside keep bystanders upwind and away from danger point. Mark out the contaminated area with signs and prevent access
to unauthorised personnel. Do not attempt to take action without suitable protective clothing – see section 8 of SDS. Turn leaking containers leak-side up to prevent the escape of liquid.
6.2. Environmental precautions
Environmental precautions: Do not discharge into drains or rivers. Contain the spillage using bunding. 6.3. Methods and material for containment and cleaning up
Clean-up procedures: Clean-up should be dealt with only by qualified personnel familiar with the specific substance. Absorb into dry earth or sand. Transfer to a closable, labelled salvage
container for disposal by an appropriate method.
Reference to other sections: Refer to section 8 of SDS. Section 7: Handling and storage
7.1. Precautions for safe handling
SAFETY DATA SHEET
USP-706b
Page: 4
6.4. Reference to other sections
Handling requirements: Avoid direct contact with the substance. Ensure there is sufficient ventilation of the area. Do not handle in a confined space. Avoid the formation or spread of mists in the air.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions: Store in a cool, well ventilated area. Keep container tightly closed.
Suitable packaging: Must only be kept in original packaging. 7.3. Specific end use(s)
Section 8: Exposure controls/personal protection 8.1. Control parameters
Specific end use(s): CLEANER FOR THE REMOVAL OF CONTAMINANTS FROM HARD SURFACES
Hazardous ingredients: SODIUM HYDROXIDE Workplace exposure limits:
DNEL/PNEC Values
DNEL / PNEC No data available. 8.2. Exposure controls
Respirable dust
State |
8 hour TWA |
15 min. STEL |
8 hour TWA |
15 min. STEL |
UK |
– |
2 mg/m3 |
– |
– |
Engineering measures: Ensure there is sufficient ventilation of the area.
Respiratory protection: Self-contained breathing apparatus must be available in case of emergency.
Hand protection: Impermeable gloves.
Eye protection: Tightly fitting safety goggles. Ensure eye bath is to hand.
Skin protection: Impermeable protective clothing. Section 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
State: Liquid Colour: Yellow
Odour: Barely perceptible odour Evaporation rate: Negligible
Oxidising: No data available.
Solubility in water: Soluble Viscosity: Non-viscous
Page: 5
Melting point/range°C: No data available. upper: No data available. Part.coeff. n-octanol/water: No data available. Vapour pressure: No data available.
Boiling point/range°C: Flammability limits %: lower: Flash point°C:
aprox 100c
No data available. >93
No data available. VOC g/l: 140
9.2. Other information
Section 10: Stability and reactivity
10.1. Reactivity
Other information: No data available.
Autoflammability°C: Relative density: 1.02
pH: >11.5
SAFETY DATA SHEET
USP-706b
Reactivity: Stable under recommended transport or storage conditions. 10.2. Chemical stability
10.3. Possibility of hazardous reactions
Chemical stability: Stable under normal conditions.
Hazardous reactions: Hazardous reactions will not occur under normal transport or storage conditions.
Decomposition may occur on exposure to conditions or materials listed below.
10.4. Conditions to avoid
Conditions to avoid: Heat. 10.5. Incompatible materials
10.6. Hazardous decomposition products
Materials to avoid: Strong oxidising agents. Strong acids. Haz. decomp. products: In combustion emits toxic fumes.
Section 11: Toxicological information 11.1. Information on toxicological effects
Hazardous ingredients: SODIUM HYDROXIDE
IPR |
MUS |
LD50 |
40 |
mg/kg |
ORL |
RBT |
LDLO |
500 |
mg/kg |
Relevant hazards for product:
Symptoms / routes of exposure
SAFETY DATA SHEET
USP-706b
Page: 6
Hazard |
Route |
Basis |
Skin corrosion/irritation |
DRM |
Hazardous: calculated |
Serious eye damage/irritation |
OPT |
Hazardous: calculated |
Skin contact: Blistering may occur. Progressive ulceration will occur if treatment is not immediate. Eye contact: Corneal burns may occur. May cause permanent damage.
Ingestion: Corrosive burns may appear around the lips. Blood may be vomited. There may be bleeding from the mouth or nose.
Inhalation: There may be shortness of breath with a burning sensation in the throat. Exposure may cause coughing or wheezing.
Delayed / immediate effects: Immediate effects can be expected after short-term exposure. Section 12: Ecological information
12.1. Toxicity
Hazardous ingredients:
ISOTRIDECANOL ETHOXYLATE (EO 6 – 20)
12.2. Persistence and degradability
Persistence and degradability: Biodegradable. 12.3. Bioaccumulative potential
Bioaccumulative potential: No bioaccumulation potential. 12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
Mobility: Readily absorbed into soil.
PBT identification: This product is not identified as a PBT/vPvB substance.
12.6. Other adverse effects
Section 13: Disposal considerations
13.1. Waste treatment methods
Other adverse effects: Negligible ecotoxicity.
Disposal operations: Transfer to a suitable container and arrange for collection by specialised disposal company.
Disposal of packaging: Clean with water.
Daphnia magna Acute |
48H EC50 |
1-100 |
mg/l |
FISH Acute |
96H LC50 |
1-100 |
mg/l |
SAFETY DATA SHEET
USP-706b
NB: The user’s attention is drawn to the possible existence of regional or national regulations regarding disposal.
Section 14: Transport information 14.1. UN number
UN number: N/A 14.2. UN proper shipping name
14.3. Transport hazard class(es)
14.4. Packing group
14.5. Environmental hazards
Shipping name: “NOT SUBJECT TO ADR”
Environmentally hazardous: No Marine pollutant: No
14.6. Special precautions for user Section 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Special precautions: No special precautions. Specific regulations: Not applicable.
15.2. Chemical Safety Assessment
Section 16: Other information Other information
Page: 7
Other information: This safety data sheet is prepared in accordance with Commission Regulation (EU) No 2015/830.
* indicates text in the SDS which has changed since the last revision. Phrases used in s.2 and s.3: H302: Harmful if swallowed.
H302+332: Harmful if swallowed or if inhaled. H314: Causes severe skin burns and eye damage. H315: Causes skin irritation.
H318: Causes serious eye damage.
Legal disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any
damage resulting from handling or from contact with the above product.
Clean
Clean
USP TRAINING
Our training courses and schemes will ensure you are competent and qualified to use your new products correctly and efficiently.
Tel: 0844 811 1370
USP MARKETING
With milestone growth estimates and mapped marketing campaign, we can help you reach the widest audience in print, digital, social and more.
Tel: 0844 811 1370
Your products, your way. We can brand your products with your logo. If you’re a startup business we can even help you with designs and brand identity.
Tel: 0844 811 1370
USP SOCIAL MEDIA
Your message is as important as your presence and with a fully managed social media profile we ensure you’re always relevant in the changing online world.
Tel: 0844 811 1370
USP WEBSITE SOLUTIONS
Your online presence is key to your growth and success. We provide a full website package, including SEO optimisation, ecommerce solution, industry-specific and expertly built.
Tel: 0844 811 1370
USP LABELS
We can assist in the design and supply of all your labels and packaging, highly aesthetic and communicative marketing, labelling and packaging to make your brand shine.
Tel: 0844 811 1370
USP DEVELOPS
Development is our strength, not only that, we ensure compliance and performance are combined. If your specific requirement needs an approval, we are also experts in this element of manufacture and supply.
Tel: 0844 811 1370
USP INNOVATES
If you have a specific requirement or problem and require a solution, USP is your perfect partner.
Contact us to learn more about our innovative product developments and how we can help you and your business.
Tel: 0844 811 1370
Reviews
There are no reviews yet.